As a CTWA member you may checkout video from the club library.
While the club continues to have Zoom meeting meetings instead of in person meetings, Suzi has the library at her house. If there is a DVD you would like you may call Suzi at 512-789-9368 and tell her what DVD you want (see list below). Or tell her what you’re looking for and she can help you find it. Suzi will mail it to you along with a return label. You may mail it back to her using the enclosed label, drop it off for her at Westminster Manor, 4100 Jackson Ave, Austin, TX or, drop it at the wood depot with Gary Roberts. When you return the DVD, please include the mailing cost that Suzi paid to send it to you.
A01 | Klein, Bonnie Jordan, John Johnston, Bill Lacer, Alan | Fundamentals of Sharpening | AAW | sharpening | 1 | |
---|---|---|---|---|---|---|
A02 | Klein, Bonnie Jordan, John Johnston, Bill Lacer, Alan | Fundamentals of Sharpening | AAW | sharpening | 1 | |
A03 | St. Leger, Mark | Skill Building Exercises - part 2 | Afternoon session, July 18, 2009 | technique | ||
A04 | Brinkman, Jim | EZ Woodturning tools | April 2014 Demonstration | tools | EZ-Wood | 1 |
A05 | Trout, Alan | Preparation of a Burl for Casting - Part 1 | wood prep | 1 | ||
A06 | Stott, Chris | Turning Bowls | Correct technique for bowl gouges and other tools. Use of scrapers and sanding techniques to achieve the ultimate finish. | tools bowl | ||
A07 | Stott, Chris | Natural Edges, Hollow Forms | Create end grain bowls from branches while retaining the bark as a rim. Demonstrates the advantages of rough turning bowls and how to remount them when dry and warped. | bowl natural | ||
A08 | Avisera, Eli | Advanced level segemented bowls volume 3 | CTWA | segment | 3 | |
A09 | Avisera, Eli | Advanced level lignotec compound slide volume 4 | CTWA | segment | Jig | 3 |
A10 | Avisera, Eli | Advanced level long stemmed and thin projects vol 5 | CTWA | project | long, thin | 3 |
A11 | Avisera, Eli | Adv level segemet star blank with decorations vol 6 | CTWA | segment | 3 | |
A12 | Avisera, Eli | Advanced level hollow from green wood volume 7 | CTWA | wood prep | 3 | |
A13 | Adkins, Jim | Native American Baskets Part 1 | CTWA | project | basket | |
A14 | Bosch, Trent | Decorative Utility Bowls | CTWA | bowl | start to finish | 1 |
A15 | Bosch, Trent | Vessels of Illusion | CTWA | vessel | carving/bending | 1 |
A16 | Bosch, Trent | Sculpting Wood | CTWA | technique | off lathe carving | 1 |
A17 | Batty, Allan | Hand Thread Chasing | CTWA | technique | chasing threads | 3 |
A18 | Batty, Allan | The Skew Chisel | CTWA | tools | Skew | 1 |
A19 | Hurt, Russ | An Introduction to Bowl Turning | CTWA | bowl | 1 | |
A20 | Dick, David | Birdhouses | CTWA 1/2009 | project | birdhouses | 1 |
A21 | Tolly, Johnny | Square/Hollow Ornaments | CTWA 1/2017 | project | ornaments | 1 |
A22 | LeGrue, Steve | Surface Decoration | CTWA 10/2012 | embellishment | 1 | |
A23 | Kay, Charlie | Making a Pepper Mill | CTWA 11/2007 | project | peppermills | 2 |
A24 | CTWA members | Tips, Hints and Jigs | CTWA 11/2014 | ideas | 1 | |
A25 | Brinkman, Jim | EZ Wood Chuck Features | CTWA 11/2015 | tool | chuck ezwood | 1 |
A26 | Brissette, Len | Miniature Cowboy Hats | CTWA 3/2016 | project | hat | 3 |
A27 | Dick, David | Spindle Turning and Stools | CTWA 4/2006 | project | 3 lg stool, 1 leg stool | 1 |
A28 | Carpenter, Hilda | Tips for Drozda Finials | CTWA 4/2015 | techniques | finials | 1 |
A29 | Dick, David | Turning Thin Stem Goblets | CTWA 5/2008 | project | goblet | 1 |
B01 | Kay, Charlie | Turning Bottle Stoppers | CTWA 5/2008 | project | 1 | |
B02 | Parker, Suzi John | Making a Simple Kaleidoscope | CTWA 5/2015 | project | kaleidoscope | |
B03 | Ingram, Herb | Lidded Boxes | CTWA 6/2016 | boxes | 1 | |
B04 | LeGrue, Steve | Chisels and Skews | CTWA 8/2008 | techniques | 2 | |
B05 | Clewes, Jimmy | Square Box with Lid/Thin Stem Goblet | CTWA 8/2015 | projects | box, goblet | 1 |
B06 | Clewes, Jimmy | Lidded Box with Cocobolo Insert/Platter | CTWA 8/2015 | box | 1 | |
B07 | Ingram, Herb | Turning a Mesquite Rolling Pin | CTWA 9/2015 | project | rolling pin | 1 |
B08 | Johnson, James, Joe Kirk, Bill Hammack & daughter Carolyn | 25th CTWA Anniversary Celebration | CTWA Anniversary Celebration | history | 1 | |
B09 | Batty,Allan | Volcano Bowl, Thin Stemmed Goblet | CTWA Demo | project | volcano bowl, thin stem goblet | 1 |
B10 | Batty, Allan | Thin Stem Goblet, Spherical Box | CTWA Demo | project | thin stem goblet, Spherical box | 1 |
B11 | Brissette, Len | Banksias Pod Box | CTWA Demo | box | banksia pod | 1 |
B12 | Brissette, Len | Turning a Peppermill | CTWA Demo | project | peppermill | 1 |
B13 | Lacer, Alan | Skew chisel & Hook tools Disc 1 | CTWA Demo | tool | skew, hook | 2 |
B14 | Lacer, Alan | Skew chisel & Hook tools Disc 2 | CTWA Demo | tool | skew, hook | 2 |
B15 | Johnson, JR | Turning the Big Ones | CTWA Demo 1990 | large turning | 2 | |
B16 | Drozda, Cindy | Finial Box | CTWA Demo 2006 | project | 1 | |
B17 | Drozda, Cindy | Banksias Pod Box | CTWA Demo 2006 | boxes | 1 | |
B18 | Drozda, Cindy | Triangular Box | CTWA Demo 2006 | boxes | 1 | |
B19 | Drozda, Cindy | Gallery Presentation, Lidded Hollow Form | CTWA Demo 2006 | technique | hollow | 1 |
B20 | Spano, Jim and Tolly, Johnny | PVC Beads of Courage Boxes | CTWA Demo 2013 | project | BOC Boxes | 1 |
B21 | Shelton, Drew | Turning a twisted box | CTWA Demo 2014 | project | 2 | |
B22 | Tolly, Johnny | Beads, Beads, Beads | CTWA Demo 2014 | project | beads | 2 |
B23 | Timmerman, Craig | Turning a Weedpot | CTWA Demo 2014 | project | weed pot | 1 |
B24 | Hosaluk, Michael | Saturday AM Demo | CTWA Demo Apr 2008 | project | ||
B25 | Mocho, Michael | Tool Caddies and Grinding Stations | CTWA Demo Apr 2008 | tool | 1 | |
B26 | Mocho, Michael | Texturing with the Skew and Spindle Gouge | CTWA Demo Apr 2008 | embellishment | 2 | |
B27 | Mocho, Michael | Using the Sorby Spiraling Tool and Hand Thread Chasing | CTWA Demo Apr 2008 | tool technique | 3 | |
B28 | Mocho, Michael | Using the Skew Chisel | CTWA Demo Apr 2008 | tool | skew | 2 |
B29 | Timmerman, Craig - Kay, Charlie - Besperka, Jack - White, Tim | Finishes for Wood turners | CTWA Demo Apr 2009 | finish | 1 | |
B30 | Hawkins, Peter | Winged Bowl Natural Edge | CTWA Demo Apr 2010 | project | wing bowl | 2 |
B31 | Tolly, Johnny | Turning Bullet pens | CTWA Demo Apr 2012 | project | pens | 1 |
B32 | Enloe, Tom | Goblet Stretcher | CTWA demo Apr 2013 | project | goblet | 2 |
B33 | Timmerman, Craig | Natural Edge Bowls | CTWA Demo Apr 2016 | project | natural edge bowl | 1 |
B34 | Hager, Stacey | Turning an Inside Out Ornament | CTWA Demo Aug 2007 | project | inside out ornament | 2 |
B35 | Carpenter, Hilda | Airbrush Techniques on Wood | CTWA Demo Aug 2011 | color | 1 | |
B36 | Worcester, Steve | Creating a Hollow Hemisphere | CTWA Demo Aug 2011 | project | hemisphere | 3 |
B37 | Crabbe, Joel | Copper Enhancements | CTWA Demo Aug 2012 | embellishment | 2 | |
B38 | Turner, Curtis | Turning Eggs | CTWA Demo Aug. 2007 | project | 1 | |
B39 | Promo, Steve | Real Bird Houses | CTWA Demo Feb 2005 | project | birdhouses | 2 |
B40 | Hager, Stacey | Making a Threaded Box | CTWA Demo Feb 2008 | project | threaded box | 3 |
B41 | CTWA members | Hints, Tips and Jigs | CTWA Demo Feb 2009 | ideas | 1 | |
B42 | Hager, Stacey and Spano, Jim | Hand Held Thread Chasing | CTWA Demo Feb 2012 | boxes | thread chasing | 3 |
B43 | Spano, Jim | Turn a spin top box | CTWA Demo Feb 2013 | project | 1 | |
B44 | Kay, Charlie | Pyrographic designs for box lids | CTWA Demo Feb 2014 | pyrography | 1 | |
B45 | Hager, Stacey and Spano, Jim | Turning Tops | CTWA Demo Feb 2015 | project | tops | 1 |
B46 | Crabbe, Joel | Wearable Wooden Jewelry | CTWA Demo Feb. 2007 | project | jewelry | 1 |
B47 | Norton, James | Multi-Axis Design on Platter Bottom | CTWA Demo Jan 2008 | multi axis | 2 | |
B48 | Rachinsky, Anna | Turning Jewelry | CTWA Demo Jan 2010 | project | jewelry | 1 |
B49 | Weiermiller, Gary | Turning natural edge flora form | CTWA Demo Jan 2011 | project | natural edge | 2 |
B50 | Besperka, Jack | Turning Fundamentals | CTWA Demo Jan 2012 | technique | 1 | |
C01 | Brissette, Len | Innovative Bowl Turning | CTWA Demo Jan 2015 | bowl | 1 | |
C02 | Walrath, Larry | Large Hollow Forms | CTWA Demo Jul 2007 | project | hollow | 2 |
C03 | Tolly, Marcia | Pyrography on Turned Items | CTWA Demo Jul 2008 | pyrography | 1 | |
C04 | Timmerman, Craig | Turning a Sphere | CTWA Demo Jul 2013 | project | sphere | 2 |
C05 | Timmerman, Craig | Arched bowl | CTWA Demo Jul 2015 | project | arched bowl | 3 |
C06 | Williams, Judy | Defense of Spindle Turning | CTWA Demo July 2011 | technique | spindle | 2 |
C07 | Brinkman, Van Peski, Tolly, Timmerman, Brissette, Spano, Hager, Shelton, Kay | Jigs, Shortcuts and Good Ideas | CTWA Demo July 2012 | ideas | 1 | |
C08 | Spano, Jim | Turning an off-center bowl | CTWA Demo Jun 2014 | multi axis bowl | 1 | |
C09 | Foster, Clay | Turning a Vessel | CTWA Demo June 1988 | project | vessel | 1 |
C10 | Hager, Stacey | Sharpening | CTWA Demo June 2007 | sharpening | 1 | |
C11 | Walrath, Larry | Turning a Dipping Ladle | CTWA Demo June 2010 | project | ladle | 2 |
C12 | Walrath, Larry | Bowl Making raw material to finished product | CTWA Demo June 2011 | wood prep bowl | 1 | |
C13 | Williams, Judy | Basic Spindle Turning | CTWA Demo Mar 2007 | project | lace bobbins | 1 |
C14 | Ward, Don | How to Turn Closed End Pens | CTWA Demo Mar 2011 | project | pens | 2 |
C15 | Timmerman, Craig | Turning a Three Sided Bowl | CTWA Demo Mar 2012 | project | 3 side bowl | |
C16 | Tolly, Marcia & Johnny | Christmas Ornaments | CTWA Demo Mar 2013 | project | ornaments | 1 |
C17 | Tolly, Johnny | Using D-Way Beading Tool | CTWA Demo Mar 2015 | tool | beading | 2 |
C18 | Fairfield, Russ | Sanding and Finishing | CTWA Demo Mar 2016 | finish | 1 | |
C19 | Chen, Andy | Working with Corian | CTWA Demo March 2008 | non wood | 1 | |
C20 | Tolly, Johnny | Making Wind Chimes | CTWA Demo May 2007 | project | wind chimes | |
C21 | Seebeck, Curtis | Stabilizing Wood | CTWA Demo May 2012 | wood prep | 2 | |
C22 | Levi, Janice | Finials and Beyond | CTWA Demo May 2013 | project | finials | 2 |
C23 | Schaper, Dwight | Iridescent Finish | CTWA Demo May 2017 | finish | finishing | 1 |
C24 | Hager, Stacey | "Hager Style" Christmas Tree Ornaments (globe and spindle) | CTWA Demo Nov 2008 | project | ornaments | 2 |
C25 | Kay, Charlie | Turning a Salt Box | CTWA Demo Nov 2010 | project | salt box | 1 |
C26 | Peterson, Mack | Vessels, Hollow Forms & Bowls from a Flat Board | CTWA Demo Nov 2011 | |||
C27 | Green, Steve Tolly, Johnny & Marcia Spano, Jim Carpenter, Hilda | Finishing Round Table | CTWA Demo Nov 2012 | finish | 1 | |
C28 | Kay, Charlie | Turning Mystery Salt Shaker | CTWA Demo Nov 2014 | project | 2 | |
C29 | Schaeper, Dwight | Turning a Birdhouse | CTWA Demo Nov 2015 | project | birdhouses | 2 |
C30 | Pena, Raul | Small End grain Box Turned with Hook Tool | CTWA Demo Oct 2010 | boxes | 2 | |
C31 | Turner, Curtis | Pagination Techniques | CTWA Demo Oct 2011 | |||
C32 | Shelton, Drew | Large Goblet Endgrain Hollowing | CTWA Demo Oct 2016 | project | goblet | 1 |
C33 | Roberts, Gary | Making a Jagging Wheel | CTWA Demo Oct. 2007 | project | pie crust trimmer | 2 |
C34 | Johnson, James | Making Cabinet Handles | CTWA Demo Sep 2008 | project | cabinet handle | 1 |
C35 | Johnson, James | Turning "Squirts" | CTWA Demo Sep 2009 | project | seed pod | 1 |
C36 | Hager, Stacey | Preparation for Turning | CTWA Demo Sep 2010 | wood prep | 1 | |
C37 | Chen, Andy | Turning a Corian Vase | CTWA Demo Sep 2012 | non wood | 1 | |
C38 | Edwards, Bill | Presentation of Tool to Wood | CTWA Demo Sep, 2014 | technique | cuts | 1 |
C39 | Besperka, Jack | Finishing for a reason | CTWA Demo September 2007 | finish | 1 | |
C40 | Hosaluk, Michael | Saturday PM Demo | CTWA Demo, Apr 2007 | project | ||
C41 | Hosaluk, Michael | Sunday Demo | CTWA Demo, Apr 2007 | |||
C42 | Timmerman, Craig | Turning a Spout-Off Vase | CTWA Demo, Apr 2011 | project | vase | 3 |
C43 | Evans, H.O. | Segmented Turnings | CTWA Demo, April 2009 | segment | 2 | |
C44 | Bosch, Trent | Demonstration - Morning Session | CTWA Demo, April 2010 | 1 | ||
C45 | Bosch, Trent | Demonstration - Afternoon Session | CTWA Demo, April 2010 | 1 | ||
C46 | Brissette, Len | Bowl Turning & Coring | CTWA Demo, Aug 2009 | project | bowl | 1 |
C47 | Hager, Stacey | Shape & Proportion | CTWA Demo, Aug 2013 | design | 1 | |
C48 | Rogers, Jim | Woods of Central Texas | CTWA Demo, Aug2010 | wood prep | 1 | |
C49 | Tolly, Johnny | Turning Christmas Ornaments | CTWA Demo, Feb 2010 | project | ornaments | 2 |
C50 | St. Leger, Mark | Rock-A-Bye Box | CTWA Demo, July 2009 | project | ||
C51 | Timmerman, Craig | Arched tea light holder and pyramid tea light holder | CTWA Demo, July 2010 | project | tea lights | 3 |
C52 | Timmerman, Craig | Turning a Torus Vase | CTWA Demo, June 2009 | project | torus | 3 |
C53 | Promo, Steve | Turning Pill Boxes | CTWA Demo, Mar 2010 | project | pill box | 2 |
C54 | CTWA members | Hints and Tips | CTWA Demo, May 2010 | ideas | 1 | |
C55 | Trout, Alan | Casting Turning | CTWA Demo, May 2011 | |||
C56 | Brissette, Len, Jimmy Tolly & Charlie Kay | Christmas turnings | CTWA Demonstration | project | Christmas | 1 |
D01 | Drozda, Cindy | Finials burl bowl & banksias pod Disc 1 | CTWA Demonstration | project | finials, box | 1 |
D02 | Drozda, Cindy | Finials burl bowl & banksias pod Disc 2 | CTWA Demonstration | project | finials, box | 1 |
D03 | Besperka, Jack | Surface Embellishments | CTWA Demonstration July 2014 | embellishment | 1 | |
D04 | Stubbs, Del | Bowl Turning | CTWA Meeting 1985 | bowl | ||
D05 | Avisera, Eli | A Master's course in Woodturning volume 1 | CTWA Property | technique | 1 | |
D06 | Avisera, Eli | A Master's course in Woodturning volume 2 | CTWA Property | technique | 1 | |
D07 | Avisera, Eli | Beginner use & sharpening of tools Disc 1 | CTWA Property | sharpening | 1 | |
D08 | Avisera, Eli | Beginner use & sharpening of tools Disc 2 | CTWA Property | sharpening | 1 | |
D09 | Avisera, Eli | Beginner spindle turning volume 2 | CTWA Property | technique | spindle | 1 |
D10 | Avisera, Eli | Beginner bowl turning volume 3 | CTWA Property | technique | bowl | 1 |
D11 | Avisera, Eli | Beginner end grain turning volume 4 | CTWA Property | technique | end grain | 1 |
D12 | Avisera, Eli | Beginner more end grain volume 5 | CTWA Property | technique | end grain | 1 |
D13 | Avisera, Eli | Intermediate level spindle turning volume 1 | CTWA Property | technique | spindle | 2 |
D14 | Avisera, Eli | Intermediate level bowl turning volume 2 | CTWA Property | technique | bowl | 2 |
D15 | Avisera, Eli | Intermediate level bowl turning/texturing volume 3 | CTWA Property | technique | bowl finish | 2 |
D16 | Avisera, Eli | Intermediate level spindle end grain volume 4 | CTWA Property | technique | spindle end grain | 2 |
D17 | Avisera, Eli | Intermediate level long & thin spindle volume 5 | CTWA Property | technique | spindle | 2 |
D18 | Avisera, Eli | Intermediate level thin wall hollowing volume 6 | CTWA Property | technique | thin wall hollowing | 2 |
D19 | Avisera, Eli | Intermediate level perfect sphere volume 7 | CTWA Property | project | sphere | 2 |
D20 | Avisera, Eli | Advanced level prepare segemented blanks volume 1 | CTWA Property | segment | 2 | |
D21 | Avisera, Eli | Advanced level prepare segemented blanks volume 2 | CTWA Property | segment | 3 | |
D22 | Keller, Jim | Multi Axis Turning | CTWA10/2009 | multi axis | 2 | |
D23 | Dick, David, Shelton, Drew, Spano, Jim | Simple turning projects for the shop | CTWA10/2013 | project | misc | 1 |
D24 | Horn, John | Turning Wooden Toy Cars | CTWADemo Apr 2008 | project | cars | 1 |
D25 | Schaeper, Dwight | Mini Lathe Gift Ideas | CTWADemo Jul 2016 | project | misc | 1 |
D26 | Darlow, Mike | The Practice of Woodturning | Faceplate turning, bowl turning | bowl | 1 | |
D27 | SWAT 2007 | Instant Gallery, Vol. 1 | Images from the gallery | gallery | ||
D28 | SWAT 2007 | Instant Gallery, Vol. 2 | Images from the gallery | gallery | ||
D29 | Sorby, Robert | Focus on Metal Spinning | Introduction to metal spinning. Tools, metals, 3 projects. | metals project | ||
D30 | Banos, Orlando; Brissette len; Spano, Jim; Timmerman, Craig | Tool Sharpening discussion | June 2013 demonstration | sharpening | 1 | |
D31 | St. Leger, Mark | Skill Building Projects | Lathe tune-up, Morse taper glue block, toadstool, fly house, tool sharpening, sphere, nut and bolt. | project techniques | ||
D32 | St. Leger, Mark | Skill Building Exercises - part 1 | Morning session, July 18, 2009 | technique | ||
D33 | Bosch, Trent | The Creative Process | planning, ideas | design | 1 | |
D34 | Burningham, Rex Christensen, Kip | Woodturning Projects with Rex and Kip | Prop CTWA | project | misc small | 1 |
E01 | Burninham, Rex and Christensen, Kip | Woodturning Projects with Rex and Kip #3 | Prop CTWA | project | misc small | 1 |
E02 | Bullock, Ken | Natural Lipped Bowls my way | Prop CTWA | bowl | 1 | |
E03 | Clewes, Jimmy | Turn It Up, Vol. 3 | Prop CTWA | bowl | 2 | |
E04 | Clewes, Jimmy | Turn It On 2 | Prop CTWA | wood prep, bowl, goblet | 1 | |
E05 | Clewes, Jimmy | Turn It On 3 | Prop CTWA | |||
E06 | Clewes, Jimmy | Turnaround | Prop CTWA | boxes | oyster box | 1 |
E07 | Cook, Nick | Projects for Everyone, Vol. 1 | Prop CTWA | project | spindle project, rolling pins, rattles | 1 |
E08 | Cook, Nick | Projects for Everyone, Vol. 2 | Prop CTWA | project | plate. Bowl | 1 |
E09 | Clewes, Jimmy | Turn It Up, Vol. 1 | Prop CTWA | |||
E10 | Clewes, Jimmy | Turn It Up, Vol. 2 | Prop CTWA | |||
F02 | Clewes, Jimmy | Turn It Up, Vol. 3 | Prop CTWA | |||
F03 | Clewes,Jimmy | Jimmy Goes to Norway - Vol. 1 | Prop CTWA | project | Spoon, Beer bowl | 1 |
F04 | Clewes,Jimmy | Jimmy Goes to Scotland - Vol. 2 | Prop CTWA | project | Shield, Spurtle | 1 |
F05 | Clewes, Jimmy | Back to Basics | Prop CTWA | tools project | Bowl, Candlestick, Pen | 1 |
F06 | Darlow, Mike | The Practice of Woodturning | Prop CTWA | beginner spindle | 1 | |
F07 | Drozda, Cindy | Fabulous Finial Box | Prop CTWA | boxes | 1 | |
F08 | Ditmer, Judy Scarpino, Betty Holzapfel, Michelle | Signatures in Wood | Prop CTWA | design | 1 | |
F09 | Ditmer, Judy Scarpino, Betty Holzapfel, Michelle | Signatures in Wood | Prop CTWA | design | 1 | |
F10 | Ellsworth, David | Tips for Turners | Prop CTWA | sharpening bowl | technique | 1 |
F11 | Ellsworth, David | Tips for Turners 2 | Prop CTWA | vacuum | 1 | |
F12 | Ellsworth, David | Tips for Turners 3 | Prop CTWA | bowl wood prep hollowing finish | 1 | |
F13 | Ellsworth, David | Tools for Hollow Turning | Prop CTWA | hollow | 1 | |
F14 | Ellsworth, David | The Ellsworth Signature Gouge | Prop CTWA | tools | 1 | |
F15 | Escoulen, Jean Francois | The Escoulen Chuck Multi-Axis Turning | Prop CTWA | tool | Chuck | 1 |
F16 | Fairfield, Russ | Finishing Secrets, 1 | Prop CTWA | finish | 1 | |
F17 | Fairfield, Russ | Finishing Secrets, 2 | Prop CTWA | finish | 1 | |
F18 | Fairfield, Russ | Finishing Secrets, 3 | Prop CTWA | finish | 1 | |
F19 | Green, Steve | Wood Mineral Inlays | Prop CTWA | embellishment | 1 | |
F20 | Hosaluk, Michael | The art of Hosaluk in woodturning Vol 1 | Prop CTWA | design | 1 | |
F21 | Hosaluk, Michael | The art of Hosaluk in woodturning Vol 2 | Prop CTWA | design | 1 | |
F32 | Jamieson, Lyle | Hollow Forms the Easy Way | Prop CTWA | hollow | 1 | |
F33 | Jordan, John | The Aesthetics and Properties of Wood Disc 1 of 2 | Prop CTWA | wood prep | 1 | |
F34 | Jordan, John | The Aesthetics and Properties of Wood Disc 2 of 2 | Prop CTWA | wood prep | 1 | |
F35 | Jones, Ray | A Course on Spindle Turning | Prop CTWA | technique | 1 | |
G01 | Jones, Ray | Bowls for Beginners | Prop CTWA | bowl | ||
G02 | Jordan, John | Hollow Turning | Prop CTWA | hollow | ||
G03 | Jamieson, Lyle | Bowl Basics the Easy Way, 1 | Prop CTWA | bowl | 1 | |
G04 | Jamieson, Lyle | Bowl Basics the Easy Way, 2 | Prop CTWA | bowl | 1 | |
G05 | Jordan, John | The Aesthetics and Properties of Wood Disc 2 of 2 | Prop CTWA | wood prep | ||
G06 | Klein, Bonnie | Techniques and Projects | Prop CTWA | project | misc small | 1 |
G07 | Klein, Bonnie | Turned Bowls and other Projects | Prop CTWA | bowl | 1 | |
H01 | Klein, Bonnie | Turned Bowls and other Projects | Prop CTWA | embellishment | 1 | |
H02 | Klein, Bonnie | Turning Unusual Materials | Prop CTWA | non wood | 2 | |
H03 | Klein, Bonnie | Turned Boxes with Threaded Lids | Prop CTWA | boxes | 3 | |
H04 | Key, Ray | The Basic Box | Prop CTWA | boxes | 1 | |
H05 | Key, Ray | The Capsule Box | Prop CTWA | boxes | 1 | |
H07 | Key, Ray | The Finial Box | Prop CTWA | boxes | 3 | |
H08 | Lacer, Alan | The Skew Chisel | Prop CTWA | technique | skew | 2 |
H09 | Lacer, Alan | The Son of Skew | Prop CTWA | technique | skew | 2 |
H10 | Lacer, Alan | Projects Along the Woodturning Trail Disc 1 of 2 | Prop CTWA | project | weed pots, handle, peppermill | 1 |
H11 | Lacer, Alan | Projects Along the Woodturning Trail Disc 2 of 2 | Prop CTWA | project | bowl, goblet | 1 |
H12 | Lacer, Alan | Shop made Tools & Jigs | Prop CTWA | tools | 2 | |
H13 | Lacer, Alan | Woodturning | Prop CTWA | technique | 1 | |
H14 | Lacer, Alan | The Skew Chisel | Prop CTWA | tool | skew | 2 |
H15 | Lacer, Alan | The Skew Chisel-Dark Side/Sweet Side | Prop CTWA | 2 | ||
H16 | Lucas, Glen | Mastering Woodturning-Tools and Techniquw | Prop CTWA | tools technique | 1 | |
H17 | Moulthrop, Ed | Woodturning Pioneer | Prop CTWA | history | ||
H18 | Mahoney, Mike | From the Tree to the Table | Prop CTWA | wood prep | start to finish | |
H19 | Michelson, Johannes | Turn a Wood Range Rider | Prop CTWA | project | hat | |
H20 | Marks, David | Gilding and Chemical Paginations | Prop CTWA | embellishment | ||
H21 | Mahoney, Mike | Hollow Forms and Urns | Prop CTWA | project | urns | 3 |
H22 | Nish, Dale | The Wood turners Mentor | Prop CTWA | history | 1 | |
H23 | Osolnik, Rude | Dean of American Wood turners | Prop CTWA | history | 1 | |
H24 | Pho, Binh | Surface Design on Thin Wall Turning | Prop CTWA | embellishment | 2 | |
H25 | Pho, Binh | Using an Airbrush to Spray Acrylics & Dyes | Prop CTWA | color | 2 | |
H26 | Raffan, Richard | Turning Projects | Prop CTWA | turning | start to finish | 1 |
H27 | Raffan, Richard | Turning Boxes | Prop CTWA | boxes | 1 | |
H28 | Raffan, Richard | A Basic Bowl on the Lathe | Prop CTWA | bowl | 1 | |
H30 | Raffan, Richard | Hollow End Grain | Prop CTWA | project end grain | ||
H31 | Raffan, Richard | Turning a Box with a Fitted Lid | Prop CTWA | boxes | ||
H32 | Ruminski, Joe | Beginning Spindles to Bowls | Prop CTWA | beginner technique projects | start to finish | 1 |
H33 | Rex & Kip | Woodturning projects volume 1 | Prop CTWA | project | 1 | |
H34 | Rex & Kip | Woodturning projects volume 2 | Prop CTWA | project | ||
H35 | Springett, David | Elliptical Turning | Prop CTWA | technique | oval turning | |
H36 | Sharpless, Palmer | The Johnny Appleseed of Turners | Prop CTWA | history | ||
H37 | Theobald, Curt | Segmented Patterns | Prop CTWA | segment | 2 | |
H38 | Johnson, Bill | Techniques & Design in Platters | purchased | embellishment | 2 | |
H39 | Trout, Alan | Casting the Burl – Part 2 | s | wood prep | 1 | |
H40 | Stott, Chris | First Steps in Woodturning | Selection and use of basic woodturning tools. Tool movements required to make simple projects. | beginner technique | beginners | |
H41 | Stott, Chris | Decorative Effects and Coloring | Simple carving, abrading to grain enhancement, complex coloring from burning and sandblasting to chemical dyeing. | surface color | ||
H42 | Turner | Title | Source | Topic | Subtopic | Skill Level |
H43 | Darlow, Mike | The Practice of Woodturning | Spindle turning II, cup chuck turning | spindle techniques | 1 | |
H44 | Roberts, Larry | Back to Basics | SWA 2014 | techniques | 1 | |
H44a | Pho, Binh | Piercing an d Texturing | SWAT 20018 | embellishment | 2 | |
H45 | Cook, Nick | Making Threaded Boxes | SWAT 2004 | boxes threading | 3 | |
H46 | Worcester, Steve | Square Turning | SWAT 2004 | |||
H47 | Worcester, Steve | Tree to Bowl | SWAT 2004 | wood prep bowl | start to finish | 1 |
H48 | Klein, Bonnie | Threaded Spin Top Boxes | SWAT 2005 | boxes | 3 | |
H49 | Klein, Bonnie | Threaded Acrylic Spin Top Boxes | SWAT 2005 | boxes non wood | 3 | |
H50 | Lacer, Alan | Hollowing with Hook Tools | SWAT 2005 | technique | hollowing | 2 |
H51 | Lacer, Alan | The Skew Chisel | SWAT 2005 | technique | ||
H52 | Milsap, Joe | Kaleidoscopes | SWAT 2005 | project | kaleidoscope | 2 |
H53 | Pena, Raul | Utilization of Hook Tools | SWAT 2005 | tool | hook | 2 |
I01 | Sfirri, Mark | Two Axis Candlestick | SWAT 2005 | project mullti axis | ||
I02 | Sfirri, Mark | Inside Out with a Twist | SWAT 2005 | project insideout | ||
I03 | Tibbets, Malcolm | Segmented Basics | SWAT 2005 | segment | 2 | |
J01 | Tibbets, Malcolm | Beyond Segmented Basics | SWAT 2005 | segment | 3 | |
J02 | Tibbets, Malcolm | Segmented Sculpture | SWAT 2005 | segment | 3 | |
J03 | Chen, Andy | Segmented Vessel Design and Construction | SWAT 2006 | segment | 1 | |
J04 | Coster, Clay | Multi-Axis Turning Techniques | SWAT 2006 | multi axis | 1 | |
J05 | Foster, Clay | 2 Piece Hollow Vessel with Small Opening | SWAT 2006 | project | vessel | 2 |
J06 | Foster, Clay | Multi Axis Turning Techniques | SWAT 2006 | multi axis | 2 | |
J07 | Harris, Anthony | Turning a Saturn Box | SWAT 2006 | project | saturn box | 2 |
J08 | Harris, Anthony | Hand Chased Threaded Boxes | SWAT 2006 | project | threading | 3 |
J09 | Horn, John | Turning Your Scraps into Wearable Art | SWAT 2006 | project | jewelry | 1 |
J10 | Hout, Dave | Vacuum Chucking | SWAT 2006 | tools | vacuum chuck | 1 |
J11 | Hout, Dave | Group Discussion on Bowl Design and Turning | SWAT 2006 | design | bowl | 1 |
J12 | Leonard, John | From Wet Log to Finished Bowl | SWAT 2006 | bowl | 1 | |
J13 | MacDonald, Bonnie | Marbling on Wood, Paper and More | SWAT 2006 | embellishment | ||
J14 | Martel, Andre | End Grain Turning Techniques and Tools | SWAT 2006 | technique | end grain | |
J15 | McIntire, Ton | Segmented Pen Blanks Using Angle Cuts | SWAT 2006 | project | pen | |
J16 | Myers, Rusty | Turning Kitchen Utensils | SWAT 2006 | project | kitchen tools | |
J17 | Nittman, David | Sharpening | SWAT 2006 | sharpening | 1 | |
J19 | Nittman, David | Basket Design | SWAT 2006 | embellishment | 2 | |
J20 | Penta, Frank | Turning Multi-Axis Platters | SWAT 2006 | project | multi axis platter | 2 |
J29 | Rubenstein, Bill | Making Your Own Simple Turning Tools | SWAT 2006 | tools | 2 | |
J30 | SWAT 2006 | Instant Gallery & Saturday Night Live | SWAT 2006 | gallery | ||
J31 | Solberg, John | Design and Build Closed End Pens | SWAT 2006 | project | ||
J32 | Tiefel, Paul | Lidded Boxes, Basic and Advanced | SWAT 2006 | boxes | 2 | |
J33 | Timmerman, Craig | Two Axis Disc Shaped Vase | SWAT 2006 | multi axis | vase | 2 |
J34 | Ward, Don | Incorporate Rifle Casing/Bullets Into Pen Designs | SWAT 2006 | project | pens | 1 |
J35 | Wolfe, Andi | Wood Botany (Harvest to End Users) | SWAT 2006 | wood prep | ||
J35a | Wolfe, Andi | Surface Enhancement - Pyrography | SWAT 2006 | pyrography | 1 | |
J36 | Wolfe, Andi | Surface Enhancement - Coloring | SWAT 2006 | color | 1 | |
K01 | Zarra, Larry | Turning Tops for Fun and Profit | SWAT 2006 | project | tops | 1 |
K02 | Chen, Andy | Corian: An Alternative Turning Material | SWAT 2007 | non wood | corian | 1 |
K03 | Crabbe, Joel | Turned Wood Jewelry | SWAT 2007 | project | jewelry | 1 |
K04 | Crosby, Tom | Fitting Lids on Bowls and Boxes | SWAT 2007 | boxes | ||
K05 | Drozda, Cindy | Multi-axis Hollow Form | SWAT 2007 | multi axis hollow | 2 | |
K06 | Drozda, Cindy | Small Box with Lid, Inlay & Finial | SWAT 2007 | boxes | 1 | |
K07 | Dowdy, Delbert | Quicker, Simpler and Accurate Segmenting | SWAT 2007 | segment | 2 | |
K08 | Drozda, Cindy David Marks J Paul Fennel | Instant Gallery Critique | SWAT 2007 | gallery | 1 | |
K09 | Fennel, J. Paul | Basket Weaves, Piercing & Texturing | SWAT 2007 | embellishment | 2 | |
K10 | Fennel, J. Paul | Developing Form for Hollow Vessels | SWAT 2007 | design | vessel | 2 |
K11 | Hager, Stacey | Anticipate & Avoid Catches, Tear-Out and Chatter | SWAT 2007 | technique | 1 | |
K12 | Hager, Stacey | Making & Sharpening Tools | SWAT 2007 | tools | ||
K13 | Harris, Anthony | Sphere: Three Ways | SWAT 2007 | project | sphere | 2 |
K14 | Henry, Dan | Rose Engine Lathe | SWAT 2007 | tool | rose engine | 2 |
K15 | Henry, Dan | Inside Out Christmas Ornaments | SWAT 2007 | project | ornaments | 2 |
K16 | Hoover, Bruce | Shop Tips & Organizers | SWAT 2007 | shop | 1 | |
K17 | Horn, John | End Grain Turning Techniques & Tools | SWAT 2007 | technique | end grain | 1 |
K18 | Kloepping, Bill | Making Swirling Laminated Turning Blanks | SWAT 2007 | wood prep | 1 | |
K19 | Marks, David | Combining Wood & Metal in Turnings | SWAT 2007 | non wood | 2 | |
K20 | Marks, David | Guilding Turned Vessels with Metal Leaf | SWAT 2007 | embellishment | guilding | 2 |
K21 | Marks, David | Creating Patinas on Golded Turnings | SWAT 2007 | embellishment | guilding | 2 |
K22 | Mortimer, Stuart | Wet Translucent Hollow Form and Twisted Finial Box | SWAT 2007 | project techniques | box | 3 |
K23 | Mortimer, Stuart | Twisted Hollow Forms & Pigtails | SWAT 2007 | technique | spirals | 3 |
K24 | Mortimer, Stuart | Introduction to Spiral Work | SWAT 2007 | technique | spirals | 3 |
K25 | SWAT 2007 | Instant Gallery & Saturday Night Live | SWAT 2007 | gallery | ||
K26 | Shelton, Drew | Turning a Femisphere | SWAT 2007 | project | ||
K27 | Smith, Dave | Alcohol Dry Techniques | SWAT 2007 | wood prep | ||
K28 | Stirt, Al | Open Bowl Turning & Grain Balancing | SWAT 2007 | bowl | ||
K29 | Stirt, Al | Turned & Carved Sgraffito Platter | SWAT 2007 | project | ||
L01 | Stirt, Al | Turned & Carved Square Platter | SWAT 2007 | project | ||
L02 | Shelton, Drew | Turning Femisphere | SWAT 2007 | project | femisphere | 2 |
L03 | Tilson, Bill | Wrap Your Boxes | SWAT 2007 | |||
L04 | Timmerman, Craig | Making Bowls Fly | SWAT 2007 | bowl | winged | 2 |
L05 | SWAT 2007 | Instant Gallery Critique | SWAT 2007 - Drozda, Marks, Fennel | gallery | ||
L06 | Bassett, Kevin | Turning a Double Natural Edge Bowl | SWAT 2008 | project | natural edge bowl | 1 |
L07 | Bosch, Trent | Vessels of Illusion | SWAT 2008 | project | vessel | 2 |
L08 | Bosch, Trent | Utility Bowls | SWAT 2008 | bowl | 1 | |
L09 | Bosch, Trent | Sculpting Wood Beyond the Lathe | SWAT 2008 | surface | 2 | |
L10 | Derry, Don | Making Ornaments - Techniques & Design | SWAT 2008 | project design technique | Christmas | 1 |
L11 | Derry, Don | Hollowing Made Easy | SWAT 2008 | hollow | 1 | |
L12 | Derrry, Don | Romancing the Curve - Mastering Shape and Form | SWAT 2008 | design technique | 1 | |
L13 | Dowdy, Delbert | Segmented box with insert lid | SWAT 2008 | segmented | 1 | |
L17 | Furr, Wayne | Projects for the Beginning Wood turner | SWAT 2008 | project | misc small | 1 |
L21 | Hoover, Bruce | Sanding Secrets | SWAT 2008 | sanding | 1 | |
L22 | Horn, John | Making the Most of your Mini Lathe | SWAT 2008 | projects | misc small | 1 |
L23 | Hill, Matthew | Lidded Box with Skew, Scraper & Gouge but No Sandpaper | SWAT 2008 | boxes | ||
L24 | Hill, Matthew | Creating Texture with Carving & Custom Wood burning Tips | SWAT 2008 | embellishment | 1 | |
L25 | Hill, Matthew | Augmentation Techniques Using Color | SWAT 2008 | embellishment | 1 | |
L26 | Henry, Dan | Rose Engine Lathe | SWAT 2008 | tool | rose engine | 2 |
L27 | Kloepping, Bill | Advanced Design Laminations | SWAT 2008 | design | embellishment | 3 |
L28 | Liestman, Art | ABC's of Surface Enhancements - Pyrography & Acrylics | SWAT 2008 | surface pyrography | ||
L29 | Liestman, Art | Designing and making Teapots | SWAT 2008 | project | teapot | 2 |
L30 | Pho, Binh | Turning a Thin Wall Bowl using a gouge, light & scraper | SWAT 2008 | bowl | 3 | |
L31 | Pho, Binh | Turning a Thin Wall Bowl using a gouge, light & scraper; second edition | SWAT 2008 | project | thin walll | 3 |
L32 | Rodgers, Ken | Turning an Open-Sided Hollow Vessel | SWAT 2008 | project | hollow vessel | 2 |
L33 | Rubenstein, Bill | Feet - Getting Hollow Forms & Bowls off the Table | SWAT 2008 | design | bowl | 2 |
L34 | Scarpino, Betty | Texturing & Coloring Using Bleach, Stain & Paint | SWAT 2008 | color | ||
L35 | Scarpino, Betty | Turning & Use of Band saw to Create Finished Forms | SWAT 2008 | technique project | ||
L36 | St. Leger, Mark | "Rock-A-Bye" Box | SWAT 2008 | project | ||
L37 | St. Leger, Mark | Third Axis in Motion - 3 Axis Box with Threaded Handle & Eccentric Finial | SWAT 2008 | multi axis | box | 3 |
L38 | SWAT 2008 | Instant Gallery | SWAT 2008 | gallery | 1 | |
L39 | Solberg, John | Building a Vacuum Chuck System | SWAT 2008 | tool | vacuum chuck | 2 |
L40 | Tucker, Allan | Better Shape and Form | SWAT 2008 | design | 1 | |
L41 | Tilson, Bill | Flower Petals Bowls & Vases | SWAT 2008 | project | flowers | 3 |
L42 | Walrath, Larry | Turning Bowl from raw material to Finished Product | SWAT 2008 | wood prep bowl | 1 | |
L43 | Berry, Bill | Turning Tree Crotches | SWAT 2009 | wood prep | 1 | |
L44 | Batty, Stuart | Bowl Turning Techniques Using a Gouge | SWAT 2009 | bowl | 1 | |
L45 | Batty, Stuart | The Six Fundamental Woodturning Cuts | SWAT 2009 | beginner | hollow | 1 |
M01 | Clewes, Jimmy | Long Stemmed Goblet | SWAT 2009 | project | goblet | 2 |
M02 | Crosby, Tom | Two-Axis Potpourri Bowl | SWAT 2009 | off center | 2 | |
M03 | Clewes, Jimmy | Lidded Box with Ebony Lid | SWAT 2009 | boxes | 2 | |
M04 | Clewes, Jimmy | Coloring Pieces | SWAT 2009 | color | 1 | |
M05 | Donaldson, Jamie | Fundamentals of Square Turning | SWAT 2009 | project | 2 | |
M06 | Donaldson, Jamie | The Phrugal Photo Studio | SWAT 2009 | photography | 1 | |
M07 | DeHeer, Kirk | Demystifying Sharpening | SWAT 2009 | sharpening | 1 | |
M08 | Farrell, Tom | Basic Metal Spinning | SWAT 2009 | non wood | metal | 2 |
M09 | Hatcher, Steven | Turning Teapots | SWAT 2009 | project | teapot | 2 |
M10 | Harris, Anthony | Hand Chased Threaded Boxes | SWAT 2009 | boxes | threaded box | 3 |
M11 | Harris, Anthony | Two Bowls from One Log | SWAT 2009 | bowl | 1 | |
M12 | Hatcher, Steve | Feet and Finials | SWAT 2009 | projects | finials, feet | 2 |
M13 | Johnson, James | How to Turn Pods | SWAT 2009 | technique | pods | 2 |
M14 | Kloepping, Bill | Photos of Instant Gallery | SWAT 2009 | gallery | 1 | |
M15 | Kircus, Gene | Turning Vessels for Carving | SWAT 2009 | project | carved vessel | 2 |
M16 | Kircus, Gene | Carving a Vessel | SWAT 2009 | project | carved vessel | 2 |
M17 | Laing, Brian | Turning Finials | SWAT 2009 | project | finials | 2 |
M18 | Levi, Janice | Secrets of Turning Backyard Pine | SWAT 2009 | technique | turning pine | 1 |
M19 | Mahoney, Mike | Coring Using the Kelton Center Saver | SWAT 2009 | tool | center saver | 3 |
M20 | Mocho, Mike | Making Connections | SWAT 2009 | boxes | fitting | 3 |
M21 | Mahoney, Mike and Batty, Stuart | Dueling Lathes - Two Ways to Turn a Bowl | SWAT 2009 | bowl | 1 | |
M23 | Mahoney, Mike | Making Family Heirlooms | SWAT 2009 | bowl | 1 | |
M24 | Mocho, Michael | On-Lathe Texturing Techniques | SWAT 2009 | embellishment | 2 | |
M25 | Penta, Frank | Multi-Axis Birdhouses | SWAT 2009 | project | birdhouses | 2 |
M26 | SWAT 2009 | Critiques of Instant Gallery | SWAT 2009 | gallery | 1 | |
M27 | Zarra, Larry | Turning Miniatures | SWAT 2009 | project | miniature | 2 |
M28 | Avisera, Eli | Goblet with Star Segment and Trembleur | SWAT 2010 | project | goblet | |
M29 | Avisera, Eli | Square Bowl with Off-Center | SWAT 2010 | project | off center | |
M30 | Avisera, Eli | Boxes with New Ideas | SWAT 2010 | project | box | 2 |
M31 | Avisera, Eli | Boxes with New Ideas Texturing and Coloring In Off-Center | SWAT 2010 | project | box | 2 |
M32 | Avisera, Eli | Bowls with Leaves Inlay | SWAT 2010 | project | inlay | 2 |
M33 | Chen, Andy | Cutting Spirals on a Cylindrical Turning | SWAT 2010 | technique | spirals | 2 |
M34 | Farrell, Tom | Hemispherical Christmas Ornaments | SWAT 2010 | project | Christmas | 1 |
M35 | Foster, Clay | On the Surface | SWAT 2010 | surface | 1 | |
M36 | Foster, Clay | Multiple Axis Vessel Process and Concepts | SWAT 2010 | multi axle | 2 | |
M37 | Johnson, James | Basics How to Cut Cleanly | SWAT 2010 | technique | cuts | 1 |
M38 | Jackofsky, Mike | Hollowing a Large Open Bowl with Hollowing Tools | SWAT 2010 | bowl | 1 | |
M39 | Jackofsky, Mike | Basic Hollowing for Beginners | SWAT 2010 | hollow | 1 | |
N01 | Jackofsky, Mike | Natural Edge Burl Hollow Form | SWAT 2010 | hollow | 2 | |
N02 | Keller, Jim | Hollow Forms with Negative Spaces | SWAT 2010 | project | hollow form | 2 |
N03 | Leland, Alan | Natural Edge Mushroom Box with Hand Chased Thread | SWAT 2010 | project | ne box threaded | 3 |
N04 | Leland, Alan | Turning a Three Legged Stool | SWAT 2010 | project | 3 legged stool | |
Number | McDaniel, Marion | Long Stem Bud | SWAT 2010 | project | flowers | 2 |
O01 | Rachinsky, Anna | Small Boxes with Tight and Loose Fitting Lids | SWAT 2010 | boxes | 2 | |
P01 | SWAT 2010 | Instant Gallery and Beads of Courage | SWAT 2010 | gallery | 1 | |
P02 | Shirley, Jennifer and Foster, Clay | Turn Me a Story | SWAT 2010 | |||
P03 | Shirley, Jennifer | The Turned Canvas | SWAT 2010 | surface | ||
P04 | Shirley, Jennifer | Big Ideas in a Small Package | SWAT 2010 | project | ||
P05 | Shirley, Jennifer | Decorating Our Work - Instructed or Instinctive | SWAT 2010 | embellishment | 1 | |
P06 | Timmerman, Craig | Turn a Torus Vase | SWAT 2010 | project | ||
P07 | Winton, Molly | Creating Mini Vessels with Carvings | SWAT 2010 | project | mini vessels | 2 |
P08 | Winton, Molly | Making and Using Home Made Brands | SWAT 2010 | project | branding | 3 |
P09 | SWAT 2010 & 2011 | Instant Gallery Photos | SWAT 2010,2011 | gallery | 1 | |
P10 | Compton, Buddy | Natural - Edged Bowls | SWAT 2011 | bowls | natural edge bowl | 1 |
P11 | Cook, Nick | Pepper Mills | SWAT 2011 | project | peppermills | 1 |
P12 | Cook, Nick | Production Turning | SWAT 2011 | production | 2 | |
P13 | Ford, Dennis | Natural Edge Goblets | SWAT 2011 | project | goblet | 2 |
P14 | Furr, Wayne | Geometric Shapes | SWAT 2011 | design | 1 | |
P15 | Fisher, Doug | Turning off-axis with a vacuum chuck | SWAT 2011 | multi axis | 2 | |
P17 | Fisher, Doug | Surface texturing, carving & coloring | SWAT 2011 | embellishment | 2 | |
R01 | Hout, Dave | Metal Spinning on your wood Lathe | SWAT 2011 | non wood | 2 | |
R02 | Hout, Dave | Basic Bowl Turning | SWAT 2011 | bowl | 1 | |
R03 | Hughes, Keith | All about Sharpening | SWAT 2011 | sharpening | 1 | |
R04 | Haymond, Paula | Piercing made Easy (transfer, burning, piercing) | SWAT 2011 | embellishment | 2 | |
R05 | Irven, Thomas | Hand Chasing Corian Insert for Boxes | SWAT 2011 | boxes | 2 | |
R06 | Keller, Jim | Long Stemmed Flowers | SWAT 2011 | project | flowers | 3 |
R07 | Lacer, Alan | Befriending the Skew | SWAT 2011 | technique | tool | 2 |
R08 | Lacer, Alan | Hook Tools & Boxes | SWAT 2011 | tool, boxes | 1 | |
R09 | Rosand, Robert | Lidded boxes | SWAT 2011 | boxes | 2 | |
R10 | Rosand, Robert | Candle Stick & Candle Ring Holder | SWAT 2011 | project | candlestick | 2 |
R11 | Rosand, Robert | Christmas Ornaments & Acorn Birdhouses | SWAT 2011 | project | ornaments | 1 |
R12 | SWAT 2011 | Ornamental Turning | SWAT 2011 | |||
R13 | SWAT 2011 | Better demonstrating | SWAT 2011 | demonstrating | 1 | |
R14 | Theobald, Curt | Pushing to the next Level | SWAT 2011 | 2 | ||
R15 | Theobald, Curt | Thinking outside the Box | SWAT 2011 | 2 | ||
R16 | Theobald, Curt | Segmenting - Where to Start | SWAT 2011 | segment | 2 | |
R17 | Ward, Don | Casting Pen Blanks | SWAT 2011 | project | pens | 2 |
R18 | Williams, Judy | Spindle Turning | SWAT 2011 | technique | spindle | 1 |
R19 | Zarra, Larry | Turning Tops for Fun and Profit | SWAT 2011 | project | tops | 1 |
R19a | Brooks, Charles | Multi-Axis three sided, three legged vessel | SWAT 2012 | project | Multi-axis | 1 |
R20 | Chen, Andy | Basic Segmented turning | SWAT 2012 | segment | 2 | |
R21 | Crabbe, Joel | Enhance your turnings with copper | SWAT 2012 | embellishment | 1 | |
R22 | Canfield, Tom | Bowl turning for beginners | SWAT 2012 | bowl | 1 | |
R23 | Drozda, Cindy | Finial star lidded bowl | SWAT 2012 | project | 1 | |
R24 | Drozda, Cindy | Gilded sea urchin Ornament | SWAT 2012 | project | sea urchin ornament | 1 |
R25 | Fleming, Ron | Power Carving the vessel | SWAT 2012 | embellishment | 2 | |
S01 | Fennel, J. Paul | A Toolbox of Embellishing Techniques | SWAT 2012 | embellishment | 2 | |
S02 | Fennel, J. Paul | Turning Hollow Forms with Homemade Tools | SWAT 2012 | hollow | 2 | |
S03 | Hoyer, Todd | Turning crotches | SWAT 2012 | wood prep | 1 | |
S04 | Hoyer, Todd | Wood characteristics | SWAT 2012 | wood prep | 1 | |
S05 | Hoyer, Todd | Vessel orientation | SWAT 2012 | design | 1 | |
S06 | Hughes, W.R. | Introduction to terming - angular turning | SWAT 2012 | technique | 3 | |
S07 | Johnson, James | Using cactus skeletons in woodturning | SWAT 2012 | non wood | 2 | |
S08 | Kaminski, Marty | In the beginning at the end | SWAT 2012 | |||
S09 | Kloepping, W.H. | Instant gallery slide show | SWAT 2012 | gallery | 1 | |
S11 | Lacer, Alan | Hollowing with hook tools | SWAT 2012 | hollowing | 2 | |
S12 | May, Kenneth | From the tree to the vessel | SWAT 2012 | design | ||
S13 | Michelson, Johannes | Mini wood hats | SWAT 2012 | project | hat | 3 |
S14 | Michelson, Johannes | Full sized wood hats | SWAT 2012 | project | hat | 3 |
S15 | Panel discussion | Pen turning discussion | SWAT 2012 | project | pen | 1 |
S16 | Panel discussion | Tips and tools for beginning turning | SWAT 2012 | technique | 1 | |
S17 | Riminski, Joe | Projects in an evening | SWAT 2012 | project | ||
S18 | Riminski, Joe | Multi Axis then what | SWAT 2012 | multi axis | 2 | |
S19 | Sinner, Steve | High Efficiency deep hollowing part 1 | SWAT 2012 | hollow | 2 | |
S20 | Sinner, Steve | High Efficiency deep hollowing part 2 | SWAT 2012 | hollow | 2 | |
S21 | Smith, Hayley | Surface enhancement part 1 | SWAT 2012 | embellishment | 1 | |
S22 | Smith, Hayley | Surface enhancement part 2 | SWAT 2012 | embellishment | 1 | |
S23 | Timmerman, Craig | Turning a Three Sided Bowl | SWAT 2012 | multi axis | 3 side bowl | |
S24 | Walrath, Larry | Turning bowls | SWAT 2012 | bowl | 1 | |
S25 | Campbell, Marilyn | Simple Inlays | SWAT 2013 | embellishment | 1 | |
S26 | Campbell, Marilyn | Making a Bandsaw Box | SWAT 2013 | project | bandsaw box | 1 |
S27 | Castel, Les | Segmented Techniques | SWAT 2013 | segment | 2 | |
S28 | Clewes, Jimmy | Platter Design & Ergonomics | SWAT 2013 | design | 1 | |
S29 | Clewes, Jimmy | Square Winged Ornamental Boxes | SWAT 2013 | boxes | 2 | |
S30 | Compton, Buddy | Winged Bowl | SWAT 2013 | bowl | 2 | |
S31 | Coppinger, Paul | Finishing | SWAT 2013 | finish | 1 | |
S32 | Harwood, Ashley | Turning Rims and Foot Design | SWAT 2013 | design | 2 | |
S33 | Harwood, Ashley | Push Cut Bowl Turning | SWAT 2013 | technique | push cut | 2 |
S34 | Jarrett, Bob | Toolmanship, Turning Baby Rattles | SWAT 2013 | project | baby rattle | 2 |
S35 | Johnson, James | Bowl Turning, Log to Lathe | SWAT 2013 | bowl | 1 | |
S36 | Jones. Roger | Lidded Boxes (Toothpick Holder) | SWAT 2013 | project | toothpick holder | 1 |
S37 | Keller, Jim | Visualizing Within the Log | SWAT 2013 | wood prep | 1 | |
S38 | Kloepping, Bill | Gallery Photos | SWAT 2013 | gallery | 1 | |
S39 | Levi, Janice | Utility Bowls | SWAT 2013 | bowl | 1 | |
S40 | McDaniel, Marion | Natural Edge Flower & Stem | SWAT 2013 | project | flowers | 3 |
S41 | Rubenstein,Bill | Vacuum Chucking | SWAT 2013 | tool | vacuum chuck | 1 |
S42 | Seebeck, Curtis | Stabilizing & Hardening Wood with Vacuum | SWAT 2013 | wood prep | ||
S43 | Solberg, John | Off Center Duck | SWAT 2013 | multi axis project | duck | 2 |
S44 | Trout, Alan | CA Finishing | SWAT 2013 | finish | 1 | |
S45 | Adkins, Jim | Native American Baskets Part 2 | SWAT 2014 | project | basket | |
S46 | Burgoon, Jim Bob | Turning Hollow Pedestal | SWAT 2014 | project | pedestal | 2 |
S47 | Brand, Les | Turn, Carve, Burn, Dye | SWAT 2014 | embellishment | 1 | |
S48 | Brand, Neal | Tippe Tops | SWAT 2014 | project | tops | 1 |
S49 | Chalmers, Colin | Lidded Box with Finial | SWAT 2014 | box | 1 | |
S50 | Carter, Alan | Thin Stem | SWAT 2014 | project | goblet | 2 |
S51 | Carter, Alan | Split Bowl | SWAT 2014 | bowl | split bowl | 2 |
S52 | Duxbury, James | Making Kaleidoscopes | SWAT 2014 | project | kaleidoscope using his pattern | 3 |
S53 | Gardner, Mark | Hollow Form: Split & Reassembled | SWAT 2014 | project | hollow | 3 |
S54 | Gotschall, Keith | Winged Bowl | SWAT 2014 | project | wing bowl | 2 |
S55 | Gardner, Mark | Surface Enhancement | SWAT 2014 | embellishment | 1 | |
S56 | Gotschall, Keith | Off Center Platter | SWAT 2014 | project | off center platter | 2 |
S57 | Hockenbery, Al | Ball in Ball | SWAT 2014 | project | ball in ball | |
S58 | Hockenbery, Al | Natural Edge Hollow Form | SWAT 2014 | project | natural edge hollow | 2 |
S59 | Jones, Jim | Light Dancers Enhancements, Part 1 | SWAT 2014 | project | 2 part hollow form | 3 |
S60 | Jones, Jim | Light Dancers Enhancements, Part 2 | SWAT 2014 | project | pierced, burned hollow form | 3 |
S61 | Lopez, Rudolph | Wing Bowls | SWAT 2014 | bowl | winged | 2 |
S62 | Lopez, Rudolph | Square to Round | SWAT 2014 | |||
S63 | Lindlow, David | Atomizer Rose Engine | SWAT 2014 | |||
S64 | Morton, Ken | Sharpening | SWAT 2014 | sharpening | 1 | |
T01 | Samuel, Avelino | Carving Straight Spiral Vessel | SWAT 2014 | 3 | ||
T02 | Samuel, Avelino | Carving Bead Cove Bowl | SWAT 2014 | bowl | 2 | |
T03 | Zarra, Larry | Miniatures | SWAT 2014 | project | miniature | 2 |
T04 | Lovelady, John | Inlaid Features | SWAT 2015 | project | inlay | |
T05 | Barnes, Gary | Three Piece Stacking Salt/Spice Box | SWAT 2016 | boxes | 1 | |
T06 | Bassett, Kevin | Acorn Ring Box with Secret Compartment | SWAT 2016 | boxes | 2 | |
T07 | Batty, Stuart, Mahoney, Mike | Batty/Mahoney Duel | SWAT 2016 | techniques | 1 | |
T09 | Batty, Stuart | Perfecting the Art of Cutting | SWAT 2016 | technique | cuts | 1 |
T10 | Batty, Stuart | Bowl Turning with the 40/40 Grind | SWAT 2016 | technique | cuts | 1 |
T11 | Batty, Stuart | Seven Set-up Fundamentals | SWAT 2016 | technique | 1 | |
T12 | Beaver, John | Wave Bowls | SWAT 2016 | technique | wave bowls | 1 |
T14 | Beaver, John | Flying Rib Vase | SWAT 2016 | project | vase | 2 |
T15 | Beaver, John | Bangles | SWAT 2016 | project | bangles | 1 |
T19 | Cardin, Ken | Pen Acrylic Metal Inserts | SWAT 2016 | project | pen | 2 |
T20 | Chen, Andy | Feature Ring in Segmented Turning | SWAT 2016 | segment | 2 | |
T21 | Drozda, Cindy | Twisted Triangle Box | SWAT 2016 | boxes | 2 | |
T22 | Drozda, Cindy | Fabulous Finial Box | SWAT 2016 | boxes | 2 | |
T23 | Foster, Clay | Grids & Spirals | SWAT 2016 | techniques | 3 | |
T24 | Foster, Clay | Low Tech Surface Enhancements and Techniques | SWAT 2016 | embellishment | 1 | |
T25 | Furr, Wayne | Turning the Clam Shell Box | SWAT 2016 | boxes | clam shell | 2 |
T26 | Johnson, James | Hints & Tips from a Third ofCentury of Woodturning | SWAT 2016 | ideas | 1 | |
T27 | Lacer, Mary | Topology | SWAT 2016 | 2 | ||
T28 | Lacer, Mary | Off Center Turning | SWAT 2016 | multi axis | 2 | |
T29 | Mahoney, Mike | Batty/Mahoney Duel | SWAT 2016 | techniques | bowl | 1 |
T30 | Mahoney, Mike | Big Green Calabash Bowl | SWAT 2016 | project | bowl | 2 |
T31 | Mahoney, Mike | Plates, Platters and Bowls | SWAT 2016 | techniques | 1 | |
T32 | Mahoney, Mike | Hollow Forms with Threaded Lids | SWAT 2016 | project | hollow | 3 |
T33 | Muenzer, Kai | Vessel Standing on the Rim | SWAT 2016 | project | vase | 2 |
T34 | Sing, Dick | Hollow Ornaments | SWAT 2016 | project | ornaments | 2 |
T35 | Sing, Dick | Miniature Birdhouses | SWAT 2016 | project | ornaments | 2 |
T36 | Bosch & Batty | Duel at Swat 2017 | SWAT 2017 | techniques | 1 | |
T37 | Burgoon, Jim Bob | Between Centers – Pens | SWAT 2017 | project | pens | 1 |
T38 | Cole, Andy | Hawaiian Calabash Bowl | SWAT 2017 | project | bowl | 1 |
T39 | Cole, Andy | Bnatural Edge Nested Sets | SWAT 2017 | project | bowls | 3 |
T40 | Douphrate, Jeanne | Curves in all the Right Places | SWAT 2017 | non wood | compressed wood | 2 |
T41 | Duxbury, James | Unique Decorative Four Center Turning | SWAT 2017 | multi axis | 2 | |
T42 | Fleming, Joe | Transferring Images for Airbrushing | SWAT 2017 | finish | 1 | |
T43 | Hockenbery, Al | Fun with Vessels | SWAT 2017 | project | hollow | 1 |
T44 | Jamieson, Lyle | Thin Walled Goblet | SWAT 2017 | project | goblet | 2 |
T45 | Lacer, Alan | My friend the Skew | SWAT 2017 | tool | skew | 2 |
T46 | Levi, Janice | Fine Art of Finials | SWAT 2017 | project | finials | 1 |
W01 | Levi, Janice | Bangle, Pendant & Earrings | SWAT 2017 | project | jewelry | 1 |
W02 | Lacer, Alan | Sharpening, Turning & Basic Cuts with the Skew | SWAT 2017 | tool | 1 | |
W03 | Lofstrom, Eric | Skew Skills – Making the Cuts | SWAT 2017 | tool | 1 | |
W04 | Lofstrom, Eric | Square Rimmed Bowls | SWAT 2017 | project | bowl | 1 |
W05 | Mahoney & Batty | Duel | SWAT 2017 | project | bowl | 1 |
W06 | Mueller, David | Ground Plastic Beads as Enhancements | SWAT 2017 | embellishment | 1 | |
W07 | Rosner, Bill | Handles on Bowls | SWAT 2017 | bowl | handles | 2 |
W08 | Reid, Josh | Crush Grind Peppermills | SWAT 2017 | project | peppermills | 1 |
W09 | Seebeck, Curtis | Traditional Kaleidoscopes | SWAT 2017 | project | kaleidoscope | 1 |
W10 | Seebeck, Curtis | Science and Art of Stabilizing Wood | SWAT 2017 | wood prep | 1 | |
W11 | Tankersley, Jim | Natural Edge End Grain Mesquite Bowls | SWAT 2017 | bowl | end grain | 1 |
W12 | Winton, Molly | Pyrography Tips & Tricks (Techniques) | SWAT 2017 | pyrography | 1 | |
W13 | Winton, Molly | Pyrography Tips & Tricks (Branding) | SWAT 2017 | pyrography | 1 | |
W14 | Winton, Molly | Making MiniVessels & Carving Techniques | SWAT 2017 | project | mini vessels | |
W15 | Winton, Molly | Introduction to Surface Enhancements | SWAT2010 | embellishment | 1 | |
W16 | Colwell, DeWayne | Inside/Outside heart-shaped Candlesticks | SWAT2012 | project | inside/outside | 2 |
W17 | Stott, Chris | Turning Boxes | Three stylish boxes. Demonstrations of the cutting action of various tools. Precise instruction of techniques. | boxes | ||
W18 | Jordan, John | Bowl Turning | Using a fluted bowl gouge to turn a bowl with a face plate. Green vs. dry wood, safety, sanding and sharpening. | bowl | 1 | |
W19 | Escoulen, Jean Francois | Portrait of an Artist | Visit his home and shop in France and see his amazing multi-axis turnings. | ideas | 1 | |
W20 | Clewes,Jimmy | Jimmy Goes to Las Vegas - Vol. 3 | Wooden bangle, Closed bowl | project | 1 | |
W21 | Worcester, Steve | Hollowing and Slumped Glass | Woodturning Workshop with Tim Yoder Episode 306 | non wood | 3 | |
W22 | Bullock, Ken | Wooden Bowls on a Budget | bowl | 1 | ||
W23 | Baldwin, Doug | Photographing Wood Objects | photography | 1 | ||
W24 | Grumbine, Bill | Turned Bowls Made Easy | bowl | start to finish | 1 | |
W25 | Pompell, James | How to Turn a Green Bowl | bowl | 1 | ||
Z01 | Rosand, Robert | Turning Projects from Scraps | project | 1 | ||
Z02 | Rex & Kip | Woodturning Projects volume 3 | project | |||
Z03 | Telson, Terry and Patton, Dale | An Introduction to Spindle Turning | spindle techniques | 1 | ||
Z04 | Timmerman, Craig | Offset Bowls | project | offset bowls | 1 |